4 steps and done.

 
Step 1

Step 1

SHAKE THE CAN THOROUGHLY, SPRAY THE INTENDED SURFACE, CLEAN AND THEN DRY

Step 2

Step 2

FROM APPROXIMATELY 6 INCHES AWAY SPRAY THE SURFACE WITH LIGHT, EVEN COAT

Step 3

Step 3

WAIT APPROXIMATELY 30-45 MINUTES FOR THE SURFACE TO DRY.

Step 4

Step 4

REPEAT STEP 3, AND ALLOW THE SURFACE TO DRY FOR A MINIMUM OF 24 HOURS

 

IN ORDER TO CHECK FOR UNPROTECTED SPOTS, POUR WATER ON THE SURFACE OF YOUR INTENDED PRODUCT. IF ANY SPOTTING IS VISIBLE, SPRAY THAT AREA AGAIN.